COURSE UNIT TITLE

: MACHINE DESIGN I

Description of Individual Course Units

Course Unit Code Course Unit Title Type Of Course D U L ECTS
MAK 3027 MACHINE DESIGN I COMPULSORY 4 0 0 5

Offered By

Mechanical Engineering

Level of Course Unit

First Cycle Programmes (Bachelor's Degree)

Course Coordinator

ASSISTANT PROFESSOR MELIH BELEVI

Offered to

Industrial Engineering (Evening)
Mechanical Engineering (Evening)
Mechanical Engineering

Course Objective

It is expected that students will learn the strength of machine elements in new designs, fundamentals of the machine elements, importance of standarts and tolerances, the calculation, design and use of machine elements.

Learning Outcomes of the Course Unit

1   At the end of the course are expected to be classified according to the principle of force and couple machine elements.
2   At the end of the course it is expected that the student will be able to organize the tolerance systems at basic knowledge level
3   At the end of the course it is expected that the student will be able solve the problems using with the knowledge of the materal and strength
4   At the end of the course it is expected that the student will be able to use standarts in machine desing
5   At the end of the course it is expected that the student will be able to interpret machine desing and knowlage of the material and strength
6   At the end of the course it is expected that the student will be able to deciding which type of Unseparable joints, separable joints, shaft hub connections and spring systems will use

Mode of Delivery

Face -to- Face

Prerequisites and Co-requisites

None

Recomended Optional Programme Components

None

Course Contents

Week Subject Description
1 Introduction to machine design, standart numbers and series
2 Tolerances, training systems, surface qualities
3 Strength calculation of machine elements
4 Unseparable joints; riveted, soldered and adhesive bonded joints.
5 Unseparable joints; adhesive bonded joints and Welded joints
6 Welded joints, Bolted joints
7 Midterm 1
8 Bolted joints
9 Bolted joints, Transmission bolt
10 Transmission bolt, pins and knuckles
11 Pins and knuckles; Shaft-hub connections
12 Shaft-hub connections, Springs
13 Springs
14 Midterm 2

Recomended or Required Reading

Textbook(s): Lecturer notes
Supplementary Books:
Prof.Dr. M. Akkurt, Makina Elemanları cilt I - II, Istanbul, Birsen yayınevi
Prof.Dr. M. Akkurt, Makina Elemanları Problemleri, Istanbul, Birsen yayınevi
Fatih C. Babalık, Kadir Çavdar, Makina Elemanları ve Konstrüksiyon Örnekleri, Bursa , Dora Basım Yayın
Fatih Babalık, Kadir Çavdar vd.. Makine Elemanları Çözümlü Problem kitabı, Dora yayınları
Prof.Dr. Hikmet Rende, Makina Elemanları cilt I - II, Istanbul, Seç yayın dağıtım
Prof.Dr. Hikmet Rende, Soru-Yanıt şeklinde makina elemanları, Istanbul, Seç yayın dağıtım
Prof. Dr. Talat Tevrüz, Makina Elemanları ve Konstrüksiyon Örnekleri Cilt 1, Istanbul, Çağlayan Kitabevi
Dr. Isfendiyar Bakşıyev, Dr. Burhan Selçuk, Makina Elemanları problemleri, Ankara, Nobel Akademik Yay. Tic. Ltd. Şti.
Prof. Dr. Erdem Koç, Makina Elemanları Cilt 1 - 2, Ankara, Akademisyen Kitabevi
Prof. Dr. Ahmet Çetin Can, Makine Elemanları Tasarımı, Istanbul, Birsen Yayınevi

Planned Learning Activities and Teaching Methods

Theory of the course and examples are taught by presentations

Assessment Methods

SORTING NUMBER SHORT CODE LONG CODE FORMULA
1 MTE1 MIDTERM EXAM 1
2 MTE2 MIDTERM EXAM 2
3 FIN FINAL EXAM
4 FCG FINAL COURSE GRADE MTE1 * 0.25 + MTE2 * 0.25 + FIN * 0.50
5 RST RESIT
6 FCGR FINAL COURSE GRADE (RESIT) MTE1 * 0.25 + MTE2 * 0.25 + RST * 0.50


*** Resit Exam is Not Administered in Institutions Where Resit is not Applicable.

Further Notes About Assessment Methods

Two midterm exams and a final exams are held. Success grade is calculated by considering 25% of midterm exams and 50% of final exam. Depending on the situation, one of the midterm exams can be evaluated with the quiz averages (or it can be evaluated with a quiz package).

Assessment Criteria

ÖÇ1, ÖÇ2, ÖÇ3, ÖÇ4,ÖÇ5 and ÖÇ6 are assesment with exams.

Language of Instruction

Turkish

Course Policies and Rules

The information given in Technical Drawing, Static and Strength lessons is important to be able to create the sub-structure of the course.
It is recommended that students who take the course pay particular attention to this point. It is difficult for MAK 3027 to be successful if not enough information is available.

Contact Details for the Lecturer(s)

+90 (232) 301 92 24 mine.demirsoy@deu.edu.tr
+90 (232) 301 92 07 cicek.ozes@deu.edu.tr
+90 (232) 301 92 22 melih.belevi@deu.edu.tr
Course Assistant(s) and Contact Details: :
+90 (232) 301 92 69 firat.karasu@deu.edu.tr

Office Hours

-1 hours befor and after the lesson



Work Placement(s)

None

Workload Calculation

Activities Number Time (hours) Total Work Load (hours)
Lectures 12 4 48
Preparation for midterm exam 2 14 28
Preparation for final exam 1 18 18
Preparations before/after weekly lectures 12 2 24
Final 1 2 2
Midterm 2 2 4
TOTAL WORKLOAD (hours) 124

Contribution of Learning Outcomes to Programme Outcomes

PO/LOPO.1PO.2PO.3PO.4PO.5PO.6PO.7PO.8PO.9PO.10PO.11
LO.143
LO.243
LO.344
LO.444
LO.53
LO.6