COURSE UNIT TITLE

: ENGINEERING MECHANICS

DEGREE PROGRAMMES

Description of Individual Course Units

Course Unit Code Course Unit Title Type Of Course D U L ECTS
INŞ 2013 ENGINEERING MECHANICS COMPULSORY 3 0 0 4

Offered By

Civil Engineering

Level of Course Unit

First Cycle Programmes (Bachelor's Degree)

Course Coordinator

Offered to

Geophysical Engineering
Environmental Engineering
Mining Engineering
Geological Engineering
Geological Engineering (Evening)
Mining Engineering (Evening)

Course Objective

In the scope of this course, it is aimed to define the stresses and strains developed under loads in solids. The aim is to determine the stresses and strains under basic load conditions. The internal forces are investigated under different load conditions. The safety of structural elements due to Elastic Theory is investigated. The structural elements are designed due to Elastic Theory. Engineering systems are analyzed.

Learning Outcomes of the Course Unit

1   Have the ability to define the mechanical properties of solids.
2   Have the ability to define the stress and strain.
3   Have the ability to formulize the stress and strain under different load conditions for structural elements.
4   Have the ability to explain the assumptions and limitation of the developed formulas.
5   Have the ability to analyze the engineering systems under different load conditions, to compute the internal forces, stresses and strains, to determine the system safety or design a system.

Mode of Delivery

Face -to- Face

Prerequisites and Co-requisites

None

Recomended Optional Programme Components

None

Course Contents

Week Subject Description
1 Introduction, Concepts in Strength of Materials, Idealizations and Assumptions
2 The Mechanical Properties of Solids
3 Axial Force and Normal Stress
4 Normal Force, Shear Force and Moment Diagrams
5 Pure Bending
6 Applications
7 Midterm 1
8 Shear Force and Rivets
9 Shear Due to Bending In Transverse Load
10 Torsion
11 Stress Transformation by Analytical Method
12 Stress Transformation by Mohr Circle
13 Applications
14 Midterm 2

Recomended or Required Reading

Textbook(s): Mukavemet Cilt 1 , Mehmet H. Omurtag, Birsen Yayınevi, 2011.
Supplementary Book(s): Mechanics of Materials, Ferdinand Beer, E. Russell Johnston, Mc Graw Hill.
Mechanics of Materials, R.C . Hibeler, Pearson.
References: Course notes.

Planned Learning Activities and Teaching Methods

The course is presented in the class room. The course notes are given to students. Students study the course notes and book.

Assessment Methods

SORTING NUMBER SHORT CODE LONG CODE FORMULA
1 MTE MIDTERM EXAM
2 FIN FINAL EXAM
3 FCG FINAL COURSE GRADE MTE * 0.50 + FIN * 0.50
4 RST RESIT
5 FCGR FINAL COURSE GRADE (RESIT) MTE * 0.50 + RST * 0.50


*** Resit Exam is Not Administered in Institutions Where Resit is not Applicable.

Further Notes About Assessment Methods

None

Assessment Criteria

The assessments of LO1-2-3-4-5 are conducted by the midterms, quizzes, homeworks and final exam.

Language of Instruction

Turkish

Course Policies and Rules

The attendance to course is evaluated.

Contact Details for the Lecturer(s)

Yrd. Doç. Dr. Egemen Teomete, egemen.teomete@deu.edu.tr

Office Hours

Friday 13:30-14:30

Work Placement(s)

None

Workload Calculation

Activities Number Time (hours) Total Work Load (hours)
Lectures 12 3 36
Preparation for final exam 1 8 8
Preparation for midterm exam 2 5 10
Preparations before/after weekly lectures 14 3 42
Final 1 2 2
Midterm 2 2 4
TOTAL WORKLOAD (hours) 102

Contribution of Learning Outcomes to Programme Outcomes

PO/LOPO.1PO.2PO.3PO.4PO.5PO.6PO.7PO.8PO.9PO.10PO.11PO.12
LO.154
LO.254
LO.354
LO.454
LO.554

CONTACT INFORMATION
Dokuz Eylül Üniversitesi Cumhuriyet Bulvarı No: 144 35210 Alsancak / İZMİR
Phone: +90(232) 412 12 12 - Fax: +90 (232) 464 81 35

Copyright 2015 DEÜ. BİD

HOME / ABOUT US / DEGREE PROGRAMMES / GENERAL INFORMATION FOR STUDENTS / INTERNATIONAL RELATIONS