DEGREE PROGRAMMES

: INDUSTRIAL ENGINEERING (ENGLISH)

General Description

History

The Industrial Engineering Department was founded in 1972 within the Engineering Science Faculty of Ege University by Kemal Karhan, İlter Akat and Gündüz Balkan. The Department became a part of the Mechanical Engineering Faculty of Ege University in 1978 and then joined the Engineering Faculty of Dokuz Eylül University in 1983. The department offers graduate programs within the Graduate School of Natural and Applied Sciences. The language of the undergraduate program is Turkish while Master of Science (M.Sc.) and Doctor of Philosophy (Ph.D.) programs are offered in English.

Qualification Awarded

Ph.D. in Industrial Engineering

Level of Qualification

Third Cycle (Doctorate Degree)

Specific Admission Requirements

Second Cycle Degree in the same or in related disciplines. Acceptable score on ALES (Academic Personnel and Graduate Education Entrance Exam) or Equivalent GRE, GMAT score. Acceptable score on Language Proficiency Tests. Acceptable weighted score based on the first or second cycle (with thesis) cumulative grade point average (GPA) and ALES score. However, ALES requirement is waived for the graduates of doctorate /arts proficiency/medical residency/ dental residency/ veterinary residency/ pharmaceutical residency programs as well as for the admissions to the graduate programs offered by the Conservatory and the departments of Fine Arts Faculty, where students are admitted only by the Artistic Aptitude Test. Final admission is based on the evaluation of the related academic unit committee. International student admission requirements are decided by the Graduate School Executive Committee.

Specific Arrangements for Recognition of Prior Learning (Formal, Non-Formal and Informal)

According to the Regulations of Dokuz Eylül University for Graduate Schools, students may be accepted for graduate transfer with the approval of the Department Directorate and decision of the Board of Directors of the Graduate School in case the student fulfills the graduate transfer regulations decided by the General Council of the Graduate School. Previously taken courses at another graduate programme with a successful grade may be recognized by the related programmes with the written request of the students including course contents and the transcript, and by the recommendation of the Department Directorates and by the decision of the Board of Directors. The courses taken by the outgoing Exchange students may have the recognition at the school either as compulsory or elective by the decision of the Board of Directors.

Qualification Requirements and Regulations

4 years, 2 semesters per year, 16 weeks per semester, 240 ECTS in total.

Profile of the Programme


Educational objectives of the program include,
1) Training graduates with advanced analytical skills in the fields of Industrial Engineering and Operations Research,
2) Preparing students for scientific research and ensuring that students develop their knowledge in a specialization area
3) Providing the education necessary for students to work in leading industrial and project-based positions.
Within the scope of the graduate level in Industrial Engineering, M.Sc. in Industrial Engineering, M.Sc. in Industrial Engineering (Non Thesis), M.Sc. in Engineering Management (Non Thesis) and Ph.D. in Industrial Engineering programs offer courses in the fields of manufacturing systems, dynamic and stochastic modeling, innovation management, total quality management, simulation, lean manufacturing systems, scheduling, heuristic algorithms, risk management, investment analysis, service systems, multi-objective and multi-criteria modeling, facility planning, human factors engineering, supply chain modeling and analysis and expert systems to provide students advanced and detailed information in these fields.
There are four laboratories in the department to service undergraduate and graduate students: Intelligent Optimization and Decision Making Laboratory, Computer and Information Technologies Laboratory, Work Study and Ergonomics Laboratory and Manufacturing Systems Laboratory.
Proportion of Lessons Taught in English: 100%

Key Learning Outcomes

1   Having theoretical knowledge about industrial engineering issues and the ability to use this knowledge in the industry, knowing the management techniques for business life and being able to use these techniques; ability to apply previous research findings to industry,
2   Finding and accessing information related to a specific research field and/or an engineering problem; evaluating and interpreting the information obtained from academic papers, patents technical handbooks and industrial resources building on existing theory and implementing it to new cases; formulating a problem and developing appropriate techniques to solve it; synthesizing thoughts, developing and implementing creative and original ideas to solve complex engineering problems; developing models of complex engineering systems, testing and assessing them.
3   Publishing papers in refereed scientific journals, and evaluating new information and papers for these journals
4   Utilizing the current theory while designing an experiment, developing appropriate hypotheses, defining the constraints and assumptions related to cost, time and hardware
5   Using performance measurements to evaluate the outcomes and alternatives of the designed experiments in terms of cost, quality, time etc.; forecasting the uncertainty of the experiment;
6   Accessing and using online or traditional libraries; analyzing complex quantitative or other kinds of data using appropriate statistical and other techniques,
7   Designing, conducting and managing a research project; reporting the results of the scientific research for publishing or for other purposes; presenting or reporting the results of the scientific studies in an appropriate form for an expert group or a general audience,
8   Effective time management; understanding the fundamentals of business management; having the necessary qualifications for effective individual/group work and leadership,
9   Generating solutions to social, scientific and ethical issues of the field and business life and supporting the development of these values
10   Contributing to the process of becoming an information society by introducing the technological, social or cultural developments academically or professionally.

Occupational Profiles of Graduates with Examples

This degree enables the holder to exercise the profession in the public or private sector. Our Graduate Programs provide students with the opportunity of detailed information and expertise in various fields of Industrial Engineering. Therefore, our graduate students have employment opportunities in the positions of manager, specialist, quality assurance engineer, research and development engineer, marketing and sales manager and purchasing engineer in production and service sectors as well as having an academic career at universities:
Almost all of our graduate students have a chance to be employed in public or private sector related to their specialization areas. Nearly 80 % of our graduates are being employed in private sector institutions and 15 % in public sector.

Access to Further Studies

May apply to post doctorate programmes.

Course Structure Diagram with Credits

In addition to the compulsory courses of the programme, students register to elective courses appropriate for their thesis topic, on the consent of their supervisor. If necessary, on the consent of their supervisor, they can also register to courses from other programmes (from DEU or other universities). It?s obligatory to register to MAT5101 Applied Mathematics (3 0 0) in either semester. In the case of one of these courses taken during the M.Sc. education, these are not obligatory. The registration must be noticed to the Institute during course registration period by the supervisor.
T: Theoretical P: Practice L: Laboratory
B: Spring Semester G: Fall Semester H: Full Year
 
1 .Semester:
Semester No Course Unit Code Course Unit Title Course Unit Type T P L ECTS
G 1 MAT 5101 APPLIED MATHEMATICS COMPULSORY 3 0 0 9
G 0 - ELECTIVE COURSE ELECTIVE - - - 21
TOTAL:   30
 
2 .Semester:
Semester No Course Unit Code Course Unit Title Course Unit Type T P L ECTS
B 1 FBE 6668 PHILOSOPHY OF SCIENCE AND ETHICS COMPULSORY 3 0 0 5
B 2 IND 6098 PH.D. RESEARCH COMPULSORY 3 0 0 9
B 0 - ELECTIVE COURSE ELECTIVE - - - 16
TOTAL:   30
 
3 .Semester:
Semester No Course Unit Code Course Unit Title Course Unit Type T P L ECTS
G 1 IND 6094 PH.D. SEMINAR COMPULSORY 0 3 0 5
G 2 IND 6098 PH.D. RESEARCH COMPULSORY 3 0 0 9
G 0 - ELECTIVE COURSE ELECTIVE - - - 16
TOTAL:   30
 
4 .Semester:
Semester No Course Unit Code Course Unit Title Course Unit Type T P L ECTS
B 1 IND 6099 PH.D. THESIS COMPULSORY 0 0 0 30
TOTAL:   30
 
5 .Semester:
Semester No Course Unit Code Course Unit Title Course Unit Type T P L ECTS
G 1 IND 6099 PH.D. THESIS COMPULSORY 0 0 0 30
TOTAL:   30
 
6 .Semester:
Semester No Course Unit Code Course Unit Title Course Unit Type T P L ECTS
B 1 IND 6099 PH.D. THESIS COMPULSORY 0 0 0 30
TOTAL:   30
 
7 .Semester:
Semester No Course Unit Code Course Unit Title Course Unit Type T P L ECTS
G 1 IND 6099 PH.D. THESIS COMPULSORY 0 0 0 30
TOTAL:   30
 
8 .Semester:
Semester No Course Unit Code Course Unit Title Course Unit Type T P L ECTS
B 1 IND 6099 PH.D. THESIS COMPULSORY 0 0 0 30
TOTAL:   30
 
FLEXIBLE ELECTIVE COURSE ACCORDING TO ECTS
Semester No Course Unit Code Course Unit Title Course Unit Type T P L ECTS
Z 1 IND 5033 MANAGEMENT CONTROL SYSTEMS AND BUDGETING PROCESS ELECTIVE 3 0 0 8
Z 2 IND 5047 MODELING AND ANALYSIS OF GENERALIZED ASSEMBLY LINES ELECTIVE 3 0 0 8
Z 3 IND 5049 MODELLING AND OPTIMIZATION OF ENERGY SYSTEMS ELECTIVE 3 0 0 8
Z 4 IND 5051 OPTIMIZATION SOFTWARE ELECTIVE 3 0 0 8
Z 5 IND 5035 PERFORMANCE ANALYSIS OF MANUFACTURING SYSTEMS ELECTIVE 3 0 0 8
Z 6 IND 5045 RISK ASSESSMENT AND MANAGEMENT ELECTIVE 3 0 0 7
Z 7 IND 5043 SUSTAINABLE ENGINEERING ELECTIVE 3 0 0 7
Z 8 IND 5041 APPLIED METAHEURISTICS ELECTIVE 3 0 0 7
Z 9 IND 5039 OPERATIONS PLANNING AND SCHEDULING ELECTIVE 3 0 0 7
Z 10 IND 5037 REVENUE MANAGEMENT AND PRICING ELECTIVE 3 0 0 7
Z 11 IND 5031 LEAN PRODUCTION SYSTEMS ELECTIVE 3 0 0 8
Z 12 IND 5029 ANALYSIS OF AUTOMATED MANUFACTURING SYSTEMS ELECTIVE 3 0 0 8
Z 13 IND 5027 SYSTEMS SIMULATION ELECTIVE 3 0 0 8
Z 14 IND 5025 TOTAL QUALITY TECHNIQUES ELECTIVE 3 0 0 8
Z 15 IND 5021 INNOVATION MANAGEMENT ELECTIVE 3 0 0 8
Z 16 IND 5017 DYNAMIC AND STOCHASTIC PROGRAMMING ELECTIVE 3 0 0 8
Z 17 IND 5007 MODELLING AND ANALYSIS OF MANUFACTURING SYSTEMS USING PETRI NETS ELECTIVE 3 0 0 7
Z 18 IND 5046 LOCATION THEORY ELECTIVE 3 0 0 8
Z 19 IND 5002 ENTERPRISE MODELING AND INTEGRATION ELECTIVE 3 0 0 7
Z 20 IND 5036 FUNDAMENTALS OF OPTIMIZATION ELECTIVE 3 0 0 7
Z 21 IND 5028 HUMAN FACTOR ENGINEERING ELECTIVE 3 0 0 8
Z 22 IND 5034 SIMULATION OF MANUFACTURING SYSTEMS ELECTIVE 3 0 0 8
Z 23 IND 5026 FACILITIES PLANNING AND DESIGN ELECTIVE 3 0 0 8
Z 24 IND 5048 DECISION MODELS FOR CIRCULAR ECONOMY ELECTIVE 3 0 0 8
Z 25 IND 5024 CONSTRAINT PROGRAMMING ELECTIVE 3 0 0 8
Z 26 IND 5022 ADVANCE ENGINEERING MANAGEMENT ELECTIVE 3 0 0 8
Z 27 IND 5038 COMPUTATIONAL INTELLIGENCE IN DESIGN AND MANUFACTURING ELECTIVE 3 0 0 7
Z 28 IND 5018 MULTIOBJECTIVE AND MULTICRITERIA PROGRAMMING ELECTIVE 3 0 0 8
Z 29 IND 5032 RESPONSE SURFACE METHODOLOGY AND APPLICATIONS IN ENGINEERING ELECTIVE 3 0 0 8
Z 30 IND 5016 MAINTENANCE, REPLACEMENT AND RELIABILITY ELECTIVE 3 0 0 8
Z 31 IND 5012 FORECASTING AND TIME SERIES ANALYSIS FOR MANAGEMENT ELECTIVE 3 0 0 8
Z 32 IND 5030 TRANSPORTATION AND SUPPLY CHAIN SYSTEMS ELECTIVE 3 0 0 8
Z 33 IND 5006 PLANNING AND DESIGN OF SERVICE SYSTEMS ELECTIVE 3 0 0 8
Z 34 IND 5004 INVENTORY SYSTEMS ANALYSIS ELECTIVE 3 0 0 9
Z 35 IND 5042 COMPUTATIONAL LOGISTICS ELECTIVE 3 0 0 5
 

Examination Regulations, Assessment and Grading

Related items of Dokuz Eylül University Regulations of Graduate Education and Exams and related items of Institute of Natural and Applied Sciences Regulations of Education and Code of Practicing Exams are applied for the exams and course grades.
The course evaluation criteria are defined for each course by the instructor(s) of the corresponding course and are given in the Course Description Form found in the information package.

Graduation Requirements

Third Cycle (Doctor of Philosophy) Programme is comprised of courses (at least 67 ECTS),Ph.D.Seminar (5 ECTS), Ph. D. Research (18 ECTS) / Ph. D. Thesis (150 ECTS) courses, thesis proposal, doctoral qualifying examination and thesis examination with a total credit of 240 ECTS. Students must have minimum Cumulative Grade Point Average (CGPA) of 2.50 / 4.00 and completed all the courses with at least CB / S / TP grades.

Mode of Study (Full-Time, Part-Time, E-Learning )

Full-time

Programme Director or Equivalent

Prof. Dr. Adil BAYKASOĞLU
Department of Industrial Engineering Dokuz Eylül University,
Tınaztepe Campus 35160 Buca, İzmir, Türkiye
Phone: 232 301 76 00
E-mail adil.baykasoglu@deu.edu.tr