DEGREE PROGRAMMES

: Foundry

General Description

History

New technologies can be used widely in this sector thanks to competitive market circumstances that are based on technology. This improvement may change the sector s technical background. The sector has started to need educated and trained people because of this technological development. The foundry education is run by the colleges in university levels in our country. This program was opened in İzmir Dokuz Eylül Universitys College by the cooperation of YOK and WORLD BANK in 1985. Foundry Technician Program has the whole equipment to apply any foundry technique.

Our purpose: To train up technicians who can inquire, follow technology, think scientifically and who has the ability of problem solving and decision-making. The students who have completed their education can be technicians in the units such as production design, molding, melting, laboratories and quality control. Moreover, they can found institutions such as steel-iron companies, jewelry, art foundry, etc. thanks to their knowledge.

Qualification Awarded

Foundry Program, Associate's Degree

Level of Qualification

Short Cycle (Associate's Degree)

Specific Admission Requirements

Vocational high school diploma or high school diploma, placement through a nation-wide Student Selection Examination.

Specific Arrangements for Recognition of Prior Learning (Formal, Non-Formal and Informal)

Transfer Students:
The transfer student candidates from Turkish or foreign universities are subject to the YOK Legislation The transfer, double degree, minor degree and inter-institutional credit transfer and to the evaluation conditions determined by Dokuz Eylul University Senate. The transfer quotas are determined and announced by Turkish Higher Education Council (YOK). The evaluation of the candidates are done by the school evaluation commmisin and approved by the management.

The Graduate Transfers:
The short cycle graduates are given the right to be admitted to the first cycle programs if they comply with the conditions set by the The transfer of Short Cycle Program Graduates to First Cycle Programs Legilation of Turkish Higher Education Council (YOK) The universities inform YOK regarding the quotas and YOK announces the quotas and conditions in Graduate Transfer Guide and the placements are managed by YOK due to the results of nationwide graduate transfer exam. According to the Regulations of Dokuz Eylül University for Graduate Schools, students are not connected to the right for internal transfer, previously taken courses at another graduate programme by another university with a successful grade may be recognized by the related programmes after the letter of the students includes course contents and the transcript, and by the recommendation of the head of the departments and by the decision of the Board of Directors. The courses taken by the outgoing.

Exchange students have the recognition at the school either as compulsory or elective.

Qualification Requirements and Regulations

The student must complete 2 years of study acquiring 120 (ECTS) credits. This degree is awarded to students who have successfully completed all courses in the curriculum, compulsory 40 days of internship and have a minimum Cumulative Grade Point Average (CGPA) of 2.00/4.00 and no failing grades.

Profile of the Programme

In the program, theorical lectures that involve basic informations about casting and industry are given in the classes while application lectures are given in the program workshop. Students complete the application lectures by having industrial application for 8 weeks (40 working day obligatory) in the second year. The language of education is Turkish in Foundry Program. 50 students at first grade(Formal edu.) eveningeducation 35 Two lectureres take part in the program. There is one workshop available for the education and in this workshop which is established according to the Institute of Higher Education and World Bank Project, there are several tools available for applications. Many private sector firms and public institutions provide applications and technical travels for students.

Key Learning Outcomes

1   Students can gain the ability to have information in Maths, Science and other Occupational areas.
2   Students have the information about material that are used in the industry.
3   Students are fully-informed about molding patterns.
4   Students are informed about cleaning and heat treatment after casting the part.
5   Studens have the ability to use the techniques and technological tools that are necessary for casting applications.
6   Students can understand technicaldrawing and can make part and model design.
7   Sudents have the ability to make all the experiments in the related area.
8   Sudents have the ability to follow the related information and technological developments in the area by using a foreign language.
9   Students have the ability to reach the information and make investigation and use the related information and documents with this aim.
10   Students have the ability and necessity to learn.
11   Students have the ability to use design programs and make analysis in the related area.
12   Students have the ability to work efficiently on a specific issue alone or in a team and they have the ability to have the responsibility in gaining information.
13   Students will know the basic principles about Management and will have the ethical responsibility in the related area.
14   Students have the ability to have the necessary information and conscience in issues such as health of workers, security of laboratuars, quality management and processes and environmental protection.

Occupational Profiles of Graduates with Examples

This degree enables the holder to exercise the profession.
Our department has an important role in supplying manpower in the industry as there is no industry-based program in Türkiye. This increases the possibility of the graduates recruitment. Most of our students can be technicians in the units such as production design, molding, melting, laboratories and quality control in foundry factories. These factories are steel iron companies, jewelry, machine manufacturing, statue and arts foundry. On the other hands, our graduate students can found their own company thanks to the knowledge they acquired in the college.

Access to Further Studies

Graduated students may apply to bachelors programmes in related fields of study such as Metallurgy, Material and Manufacturing Engineering Departments in the Faculty of Engineering by an examination administered by the Student Selection and Placement Centre.
In addition, they have a choice to apply to bachelor's degree completion programmes in related fields of study such as Economics and Business Administration Departments of the Open Education Faculty in Distance Education System.

Course Structure Diagram with Credits

The courses in the curriculum belong to their semester. There is no prerequisite course in the curriculum. In the second class, students can perform industrial based learning (40 days-compulsory) lesson in the foundry industries, jewelry and metal industries which quality control and production department.
T: Theoretical P: Practice L: Laboratory
B: Spring Semester G: Fall Semester H: Full Year
1 .Semester:
Semester No Course Unit Code Course Unit Title Course Unit Type T P L ECTS
G 1 KPD 1002 CAREER PLANNING REQUIRED 1 0 0 2
G 2 TDL 1001 TURKISH LANGUAGE I REQUIRED 2 0 0 2
G 3 MAT 4001 MATHEMATIC 1 REQUIRED 2 0 0 3
G 4 BİT 4000 INFORMATION AND COMMUNICATION TECHNOLOGY REQUIRED 2 1 0 4
G 5 YDİ 1001 FOREIGN LANGUAGE I (ENGLISH) REQUIRED 2 0 0 2
G 6 DÖK 4101 CHEMISTRY REQUIRED 2 0 0 2
G 7 DÖK 4103 MOILDING I REQUIRED 3 2 0 6
G 8 DÖK 4105 DRAWING TECHNIQUES CASTINGS 1 REQUIRED 3 1 0 5
G 9 ATA 1001 PRINCIPLES OF ATATURK AND HISTORY OF THE TURKISH REVOLUTION I REQUIRED 2 0 0 2
G 10 FZK 4001 PHYSICS 1 REQUIRED 2 0 0 2
G 0 - ELECTIVE COURSE ELECTIVE - - - 0
TOTAL:   30
 
1 .Semester: Elective Course
Semester No Course Unit Code Course Unit Title Course Unit Type T P L ECTS
NA FOR THIS SEMESTER
 
2. Semester:
Semester No Course Unit Code Course Unit Title Course Unit Type T P L ECTS
B 1 DÖK 4108 FOUNDRY METALLURGY REQUIRED 3 1 0 5
B 2 DÖK 4106 INTRODUCTION TO COMPUTER-AIDED DESIGN REQUIRED 2 1 0 3
B 3 DÖK 4104 DRAWING TECHNIQUES CASTINGS 2 REQUIRED 2 1 0 4
B 4 DÖK 4102 MOILDING II REQUIRED 3 2 0 5
B 5 ATA 1002 PRINCIPLES OF ATATURK AND HISTORY OF THE TURKISH REVOLUTION II REQUIRED 2 0 0 2
B 6 MAT 4002 MATHEMATICS 2 REQUIRED 2 0 0 3
B 7 FZK 4002 PHYSICS 2 REQUIRED 2 0 0 2
B 8 TDL 1002 TURKISH LANGUAGE II REQUIRED 2 0 0 2
B 9 YDİ 1014 FOREIGN LANGUAGE II (ENGLISH) REQUIRED 2 0 0 2
B 0 - ELECTIVE COURSE ELECTIVE - - - 2
TOTAL:   30
 
2 .Semester: Elective Course
Semester No Course Unit Code Course Unit Title Course Unit Type T P L ECTS
B 1 DÖK 4110 OCCUPATIONAL SAFETY IN FOUNDRY INDUSTRY ELECTIVE 2 0 0 2
B 2 MET 4000 PROFESSIONAL ETHICS ELECTIVE 2 0 0 2
B 3 İLT 4000 COMMUNICATION ELECTIVE 2 0 0 2
 
3 .Semester:
Semester No Course Unit Code Course Unit Title Course Unit Type T P L ECTS
G 1 DÖK 4209 RUNNERS FEEDER DESIGN REQUIRED 1 1 0 4
G 2 DÖK 4207 CORE MAKING REQUIRED 2 1 0 4
G 3 DÖK 4205 CASTING LABORATORY 1 REQUIRED 2 1 0 4
G 4 DÖK 4201 METAL MELTING 1 REQUIRED 2 1 0 3
G 5 DÖK 4203 COMPUTER AIDED VOCATIONAL DRAWING 1 REQUIRED 2 1 0 3
G 0 - ELECTIVE COURSE ELECTIVE - - - 12
TOTAL:   30
 
3 .Semester: Elective Course
Semester No Course Unit Code Course Unit Title Course Unit Type T P L ECTS
G 1 DÖK 4217 RESEARCH METHODS IN FOUNDRY ELECTIVE 2 0 0 3
G 2 DÖK 4215 SOLIDIFICATION ELECTIVE 2 1 0 3
G 3 DÖK 4213 VOCATIONAL FOREING LANGUAGE ELECTIVE 2 0 0 3
G 4 DÖK 4211 WORK PIECE CLEANING ELECTIVE 1 1 0 3
G 5 DÖK 4205 CASTING LABORATORY 1 ELECTIVE 2 1 0 4
G 6 DÖK 4203 COMPUTER AIDED VOCATIONAL DRAWING 1 ELECTIVE 2 1 0 3
G 7 KGS 4000 QUALITY ASSURANCE AND STANDARDS ELECTIVE 3 0 0 3
G 8 İSL 4001 INTRODUCTION TO BUSINES MANAGEMENT 1 ELECTIVE 2 0 0 3
 
4. Semester:
Semester No Course Unit Code Course Unit Title Course Unit Type T P L ECTS
B 1 DÖK 4206 CASTING LABORATORY 2 REQUIRED 2 1 0 3
B 2 DÖK 4210 CASTING SIMULATION REQUIRED 3 1 0 4
B 3 DÖK 4204 COMPUTER AIDED VOCATIONAL DRAWING 2 REQUIRED 2 1 0 3
B 4 DÖK 4202 METAL MELTING 2 REQUIRED 2 1 0 3
B 5 EDÖ 4003 IBL (INDUSTRIAL BASED LEARNING) (8 WEEKS) SUMMER TRAINING 0 20 0 10
B 6 DÖK 4208 SPECIAL CASTING TECHNIQUES REQUIRED 2 1 0 3
B 0 - ELECTIVE COURSE ELECTIVE - - - 4
TOTAL:   30
 
4 .Semester: Elective Course
Semester No Course Unit Code Course Unit Title Course Unit Type T P L ECTS
B 1 DÖK 4206 CASTING LABORATORY 2 ELECTIVE 2 1 0 3
B 2 DÖK 4212 PROJECT TECHNIQUES ELECTIVE 2 0 0 2
B 3 DÖK 4214 QUALITY CONTROL IN CASTINGS ELECTIVE 2 0 0 2
B 4 DÖK 4216 CAST IRON HEAT TREATMENT ELECTIVE 1 1 0 2
B 5 DÖK 4204 COMPUTER AIDED VOCATIONAL DRAWING 2 ELECTIVE 2 1 0 3
B 6 KYS 4000 QUALITY MANAGEMENT SYSTEMS ELECTIVE 2 0 0 2
B 7 GÇD 1000 VOLUNTEERISM STUDIES ELECTIVE 1 2 0 4
 

Examination Regulations, Assessment and Grading

Application Principles of Education and Examination of İzmir Vocational School can be accessed from the link below.
http://imyo.deu.edu.tr/mevzuat/2.pdf

Graduation Requirements

The student must complete 2 years of study acquiring 120 (ECTS) credits. This degree is awarded to students who have successfully completed all courses in the curriculum, compulsory 40 days of internship and have a minimum Cumulative Grade Point Average (CGPA) of 2.00/4.00 and no failing grades.

Mode of Study (Full-Time, Part-Time, E-Learning )

Full-time

Programme Director or Equivalent

Program Director: Instructor Bahattin AGADAY

e.mail.: bahattin.agaday@deu.edu.tr
Phone: +90 232 301 26 05
Fax : +90 232 420 51 81