Dokuz Eylül University Information Package / Courses Catalog

Description of Individual Course Units

Course Unit Code	Course Unit Title	Type Of Course	D	U	L	ECTS
EED 2416	LABORATORY II	COMPULSORY	0	3	0	3

Offered By

Electrical and Electronics Engineering (English)

Level of Course Unit

First Cycle Programmes (Bachelor's Degree)

Course Coordinator

ASSOCIATE PROFESSOR SERKAN GÜNEL

Offered to

Electrical and Electronics Engineering (English)

Course Objective

The objective of the course is to introduce basic dynamical circuit electrical engineering measurement techniques. Measurement of time varying voltages and currents using oscilloscopes will be presented. With hands on controlled experiments, basic frequency selective circuit design and implementation techniques will be investigated.

Learning Outcomes of the Course Unit

1	To be able to carry out advanced circuit measurements involving time varying voltages and currents using oscilloscopes,
2	To have a concrete understanding of oscilloscopes operation and to be able to make advanced timing and amplitude measurements with oscilloscopes.
3	To be able implement basic dynamical circuits including capacitors and inductors physically and be able to do measurements on these circuits.
4	To be able to make circuit simulations of dynamical circuits and interpret the results.
5	To have the ability to effectively write laboratory reports and comprehend written reports, to prepare design and production reports.
6	Profound awareness of laboratory safety procedures.

Mode of Delivery

Face -to- Face

Prerequisites and Co-requisites

EED 2311 - CIRCUIT THEORY I
EED 2313 - LABORATORY I

Recomended Optional Programme Components

None

Course Contents

Week	Subject	Description
1	Introduction and Safety procedures
2	Operational Amplifiers
3	1st order circuits, Tilt Measurement
4	1st order circuits, Rise Time Measurements
5	Capacitor and Inductor Characteristics
6	Magnetic Coupling and Mutual Inductance
7	Resit Experiments
8	State space diagram of 2nd order circuits on oscilloscope
9	Phase difference measurements
10	Generalized impedance Converters (GIC)
11	Series and Parallel Resonance
12	Frequency Response of 1st and 2nd order circuits
13	Butterworth filter design
14	Resit Experiments

Recomended or Required Reading

Textbook(s)/References:
1. J.N. Nilsson & S.A. Riedel, Electrical Circuits, 8+ Ed. Pearson Prentice Hall, 2008+
2. W. Hayt J. Kemmerly & S. Durbin, Electrical Circuit Analysis, McGrawHill, 2007+
3. L.O. Chua, C.A. Desoer and E.S. Kuh, Linear and Nonlinear Circuits, McGraw-Hill, 1987
4. C.L. Alexander and M. N. O. Sadiku, Electric Circuits 4+ Ed., 2009+
5. M Nahvi and J. Edminister, Schaum's Outline of Electrical Circuits, 5+ Ed. McGraw Hill

Materials:
1. Laboratory Binders (will be available from the online course site)
2. Regularly updated lecture notes by Dr. Serkan Günel (will be available from the online course site)
3. Online Course Forum

Planned Learning Activities and Teaching Methods

1. Laboratory experiments with open discussions,
2. In-lab demonstrations and lectures,
3. Evaluated Pre and Post Experiment Reports,
4. Question and Answer style active discussions via online course forum
5. Active group study sessions

Assessment Methods

SORTING NUMBER	SHORT CODE	LONG CODE	FORMULA
1	MTE	MIDTERM EXAM
2	PRC	PRACTICE
3	FIN	FINAL EXAM
4	FCG	FINAL COURSE GRADE	MTE * 0.20 + PRC * 0.30 + FIN * 0.50
5	RST	RESIT
6	FCGR	FINAL COURSE GRADE (RESIT)	MTE * 0.20 + PRC * 0.30 + RST * 0.50

Further Notes About Assessment Methods

Each Laboratory Experiment will be evaluated depending on pre-laboratory readiness, in laboratory and post laboratory reports.

Assessment Criteria

1. Each experiment s in-laboratory work will be evaluated as 40% Pre-Lab Report + 40% Experiment Execution + 20% In lab Performance
2. Each experiment s Post Laboratory Report will be evaluated as 20%Theory + 40% Application and Results 40% Conclusion and Comments
3. The grade of each experiment will be determined by 50% Laboratory work + 50% Post-Laboratory Report
4. This course has a minimal over all grade of 60/100 to be eligible for getting a letter grade. The students whose overall grade at the end of the finals is less than 60 will be automatically graded with FF.
5. The students who fail to finish 8/10 experiments is automatically rewarded with FF irrespective of their overall grade. An experiment is considered as FAILED is the student is absent or overall grade is less than 60.
6. However, these does not mean that the students who have overall grade greater than 60 will pass the lecture. Depending on the over all statistics, one can still get FF or FD and fail. The letter grades are rewarded according to the statistical nature of the grade distribution and the over all engagement of the students to the lecture discussions.
7. Two distinct resit sessions, one in the middle of the semester and one at the end of the semester, will be reserved for that missed the experiments for those with legal excuses.

Language of Instruction

English

Course Policies and Rules

Unless otherwise announced the course has a strict attendance policy.

Contact Details for the Lecturer(s)

Coordinator : Dr. Serkan Günel
Email: serkan.gunel@deu.edu.tr
You can contact to Dr. Günel any questions on the lecture and laboratory rules and regulations.
You can also reach to lecturers and assistants form the online site of the course.
All announcements will be done over the online site of the course, and you will receive a copy of the announcements by email. Please be advised to report a email an address which you use actively.

Office Hours

At least 2 hours for free discussions is to be announced at the beginning of the semester from the online site.

Work Placement(s)