Eğitim / Akademik Bilgisi | ||
---|---|---|
Lisans | Orta Doğu Teknik Üniversitesi Mühendislik Fakültesi Uygulamali Mekanik Dalı | 1986 |
Yüksek Lisans | Orta Doğu Teknik Üniversitesi Fen Bilimleri Enstitüsü Mühendislik Bilimleri Anabilim Dalı | 1989 |
Doktora | Orta Doğu Teknik Üniversitesi Fen Bilimleri Enstitüsü Mühendislik Bilimleri Anabilim Dalı | 1998 |
Yardımcı Doçent | Dokuz Eylül Üniversitesi Mühendislik Fakültesi | 1999 |
Doçent | Dokuz Eylül Üniversitesi Mühendislik Fakültesi Makine Mühendisliği | 2009 |
Profesör | Dokuz Eylül Üniversitesi Mühendislik Fakültesi | 2017 |
NO | AD | YIL |
1 | Effects of Lay-Up Sequence and Widths on The SERR of Woven Glass Fiber Reinforced Polymer Composites... | 2019 |
2 | Experimental, analytical and numerical study of mechanical properties and fracture energy for compos... | 2019 |
3 | Thefracturebehaviorofsandwichcompositeswithdifferentcore densitiesandthicknesssubjectedtomodeIloadin... | 2019 |
4 | The temperature and pre-crack length effects on delamination resistance of woven GFRP sandwich compo... | 2016 |
5 | The design and development of solar flat mirror (Solarux) system... | 2016 |
6 | Vibration and Buckling Analysis of a Curved Sandwich Composite Beam with FEM... | 2015 |
7 | Effect of the Root Crack on the Lateral Buckling Loads and Natural Frequencies of Sandwich Composite... | 2013 |
8 | Effect of Interface Crack on Lateral Buckling Behavior and Free Vibration Response of a Sandwich Bea... | 2013 |
9 | İnsan Bacak Hareketleri İçin Prototip Dış iskelet Robotik Sisteminin Mekanik Tasarımı ve Hareket Ver... | 2012 |
10 | Fracture energy determination and critical crack propagation between core and veneer ceramic interfa... | 2009 |
11 | An Investigation of Fracture Toughness of Carbon/Epoxy Composites... | 2006 |
12 | Cracked infinite cylinder with two rigid inclusions under axial tension... | 2006 |
13 | Fracture and fatique analysis of an agitator shaft with a circumferential notch... | 2006 |
14 | Failure analysis of woven kevlar fiber reinforced epoxy composites pinned joints... | 2006 |
15 | An investigation of square delamination effects on the buckling behavior of laminated composite plat... | 2005 |
16 | Nem Ölçme Cihazlarının Kalibrasyonu İçin Yeni Bir Düzeneğin Tasarlanması... | 2004 |
17 | Thermal Residual Stresses in Aluminum Metal-Matrix Antisymmetric Laminated Plates under Uniform Temp... | 2003 |
18 | Computation of Stress Intensity Factors of An Axisymmetric Infinite Cylinder Having a Transverse Cra... | 2002 |
19 | Metroloji ve Kalibrasyon II... | 2001 |
20 | Metroloji ve Kalibrasyon I... | 2001 |
21 | Eksenel Çekmeye Maruz Ekseninde Dik Yönde İki Rijit Enklozyon Bulunan Sonsuz Silindir Problemi... | 2000 |
NO | AD | TARİH |
1 | SOLARUX CSP GREENHOUSE CULTIVATES AGRICULTURAL PRODUCTS GENERATES ELECTRICAL ENERGY INDUSTRIAL FRU... | 05/11/2017 - 08/11/2017 |
2 | EVALUATION OF FLEXURAL RIGIDITY AND SHEAR STIFFNESS OF CURVED SANDWICH COMPOSITE BEAMS... | 04/07/2017 - 07/07/2017 |
3 | The Experimental and Numerical Investigation of Fracture Behaviorof Woven-Fabric Reinforced Glass/Ep... | 02/09/2016 - 03/09/2016 |
4 | Measurement of Human Walking on Sagittal Plane for Exoskeleton Walking Pattern Generation... | 26/11/2015 - 28/11/2015 |
5 | Design and development of solar flat mirror and heat storage system... | 19/10/2014 - 22/10/2014 |
6 | THE DETERMINATION OF SHEAR STRESSES BETWEEN INTERLAMINAR FACE AND FLEXURAL RIGIDITY OF SANDWICH COMP... | 12/07/2014 - 15/07/2014 |
7 | The development and design of Solarux system with solar flat mirror and solid material high-temperat... | 20/10/2013 - 23/10/2013 |
8 | The Development and Design of Solarux System with Solar Flat Mirror and Solid Material High-Temperat... | 20/10/2013 - 23/10/2013 |
9 | Mathematical Modelling and Inverse Dynamic Analysis of Human Motion... | 09/09/2009 - 11/09/2009 |
10 | Hastanelerde Kullanılan Tıbbi Cihazların Kalibrasyonu ve Hasta Güvenliği... | 19/03/2009 - 21/03/2009 |
11 | A Determination and Estimation of Fracture Toughness of Woven Glass/Epoxy Composites... | 07/09/2008 - 11/09/2008 |
12 | Eksenel ve Çekmeye Maruz, Ekseninde Dik Yönde Bir Çatlak ve İki Rijit Enklozyon İçeren Sonsuz ... | 18/10/1999 - 20/10/1999 |
13 | Infinite cylinder with transverse crack and two rijit inclusions under axial tension... | 11/09/1999 - 15/09/1999 |
NO | BÖLÜM ADI | YIL |
1 | Mathematical modelling and inverse dynamic analysis of human motion Proceedings of Twelfth International Conference on Climbing and Walking Robots and the Support Techn... | 2010 |
NO | AD | TARIH |
1 | İnsan Bacak Hareketleri için Prototip Exoskeleton Robotik Sistemler Geliştirilmesi... | 12/2010 - 4/2013 |
2 | İnsan Yürüyüşünün Modellenmesi ve İnvers Dİnamik Analizi... | 5/2008 - 11/2009 |
3 | Diş dolgu malzemelerinin kırılma mekaniği açısından incelenmesi... | 5/2003 - 5/2006 |
NO | AD | YIL |
1 | Honour... | 2006 |
2 | Honour... | 2009 |
NO | Görev | |
1 | Mühendislik Fakültesi Makina Mühendisliği Bölümü Bölüm Başkanı, Ocak 2023-Devam ediyor | |
2 | Mühendislik Fakültesi Fakülte Kurulu Bölüm Başkanı Üyeliği, Ocak 2023-Devam ediyor | |
3 | Kalite ve Mükemmellik Uygulama ve Araştırma Merkezi Merkez Danışma Kurulu Üyesi, Ocak 2013- Ocak 2016 | |
4 | Mühendislik Fakültesi Fakülte Kurulu Doçent Üyesi, Nisan 2012- Nisan 2015 | |
5 | Mühendislik Fakültesi Fakülte Kurulu Doçent Üyesi, Nisan 2009- Nisan 2012 |