Akademik Personel - KiÅŸisel Sayfa
En

PROF. DR. ONUR SAYMAN (Emeklilik Tarihi : 16/04/2013 ) MÜHENDİSLİK FAKÜLTESİ MAKİNA MÜHENDİSLİĞİ BÖLÜMÜ MEKANİK (MAKİNA) ANABİLİM DALI

  • EÄŸitim / Akademik Bilgisi
    Lisans  Ä°stanbul Teknik Ãœniversitesi Makina Fakültesi Makina MühendisliÄŸi Bölümü  1969
    Doktora  Ege Ãœniversitesi Mühendislik Bilimleri Fakültesi Makina MühendisliÄŸi Bölümü  1975
    Yardımcı Doçent  Ege Ãœniversitesi Makina Fakültesi  1982
    Doçent  Dokuz Eylül Ãœniversitesi Mühendislik-Mimarlık Fakültesi Mekanik ve Mukavemat  1982
    Profesör  Dokuz Eylül Ãœniversitesi Mühendislik-Mimarlık Fakültesi  1990
  • NO AD YIL
    1  Modeling and stress analyses of a normal foot-ankle and a prosthetic foot-ankle complex....  2013
    2  Effect of the Root Crack on the Lateral Buckling Loads and Natural Frequencies of Sandwich Composite...  2013
    3  Effect of Interface Crack on Lateral Buckling Behavior and Free Vibration Response of a Sandwich Bea...  2013
    4  Hole Diameter Effects on Fiber-Reinforced Thermoplastic Composite Discs Possessing Distinct Fiber Ar...  2013
    5  Failure load of composite single-lap bolting joint under traction force and bending moment...  2012
    6  The Influence of Distinct Fiber Arrangement on the Thermo-Mechanical Behavior of Steel Fiber -Reinfo...  2012
    7  Determination of mechanical properties and failure pressure in composite cylinders...  2012
    8  Failure pressures of composite cylinders with a plastic liner...  2011
    9  Thermal stress analysis in ZrO2 insulation coatings on Cr-Ni substrates during cooling process...  2011
    10  Failure loads of mechanical fastened pinned and bolted composite joints with two serial holes...  2011
    11  Numerical investigation of residual stresse in YBCO/CeO2/YSZ/CeO2/Ni architextured materials for coa...  2011
    12  The Effect of Stacking Sequence and Temperature on The Mechanical and Low Velocity Impact Response o...  2010
    13  Experimental and numerical failure analysis of carbon/epoxy laminated composite joints under differe...  2010
    14  Experimental failure analysis of bolted joints in moisture- and temperature-induced composite lamina...  2010
    15  Thermal stress analysis of WC-Co/Ni-Cr multilayer coatings on 316L steel substrate during cooling pr...  2009
    16  The effect on residual stresses of porosity and surface roughness in high temperature insulation coa...  2008
    17  Experimental failure analysis of mechanically fastened joints with clearance in composite laminates ...  2008
    18  An overall view on impact response of woven fabric composite plates....  2008
    19  The Effect of Preload on Failure Response of Glass-Epoxy Laminated Composite Bolted-Joints with Clea...  2007
    20  Investigation of the influence on residual stresses of porosity in high temperature ZrO2 coatings on...  2007
    21  Numerical analysis of the influence of buffer layer thickness on the residual stresses in YBCO/La2Zr...  2007
    22  An analytical solution procedure to analyze material nonlinear behavior of laminated beams...  2007
    23  Thermal Stresses in a Thermoplastic Composite Disc under a Steady State Temperature Distribution...  2006
    24  Fiber takviyeli kompozit levhalarda baÄŸlantı ÅŸekilleri ve pim baÄŸlantıları...  2006
    25  An experimental and numerical investigation on geometrically nonlinear behavior of laminated thin pl...  2006
    26  Stress analysis of high temperature ZrO2 insulation coatings on Ag using finite element method...  2006
    27  Effects of Hardening Parameter and Strain Hardening Exponent on Residual Stress and Plastic Zone Gro...  2004
    28  Stacking sequence effects on elastic-plastic stress variation in composite plates with clamped edges...  2004
    29  Thermal Residual Stresses in Aluminum Metal-Matrix Antisymmetric Laminated Plates under Uniform Temp...  2003
    30  Elastic-Plastic Stress Analysis of Simply Supported and Clambed Thermoplastic Composite Laminated Pl...  2003
    31  Failure analysis of pin-loaded aluminum-glass-epoxy sandwich composite plates...  2003
    32  Dynamic Characteristics of Laminated Woven E-Glass/Epoxy Composite Plates Subjected to Low Velocity ...  2002
    33  Material nonlinear behavior of laminated metal-matrix composite plates supported at edges under unif...  2002
    34  Nonlinear stress analysis of unidirectionally reinforced symmetric aluminum metal-matrix laminated b...  2002
    35  Elastic-Plastic Stress Analysis of Thermoplastic Composite Beams Under Tempreture Distributed Linear...  2002
    36  Elastic-plastic stress analysis and expansion of plastic zone in clamped and simply supported alumin...  2000
    37  An Analytical Elastic-Plastic Stress Analysis in A Woven Steel Reinforced Thermoplastic Cantilever B...  2000
    38  Elastic-Plastic Stress Analysis and Residual Stresses in a Thermoplastic Composite Cantilever Beam L...  2000
    39  Elasto-Plastic Analysis in Metal Matrix Composite Beam...  1999
    40  Elasto-Plastic Stress Analysis In Fibrous Metal-Matrix Composite Ring...  1999
    41  Elastic-Plastic Finite Element Analysis of Metal matrix Plates with Edge Notches...  1997
    42  Three dimensional stress analysis in the crowned human teeth...  1997
    43  Elasto-plastic finite element analysis of orthotropic rotating discs with holes...  1994
    44  Stress Concentrations at axially loaded Projections of composite flat plates...  1993
    45  Stress Concentrations at Axially Loaded Projections of Composite Flat Bars...  1993
    46  A study of the stress analysis of two combined-material pulleys by using the finite element method...  1990
  • NO AD TARÄ°H
    1  Ã–nceden Hasara UÄŸramış Kompozit Borularda Tamiratın Etkisinin Ä°ncelenmesi... 04/05/2018 - 05/05/2018
    2  Impact Response of E-Glass Fiber Reinforced Thermoplastic & Thermoset Matrix Composites... 13/07/2014 - 19/07/2014
    3  Balistik Darbe Etkisi Altında Meydana Gelen Parçalanma (Spall) Etkisinin Sonlu Elemanlar Yöntemiy... 07/11/2013 - 09/11/2013
    4  Effect of root crack on lateral buckling loads of sandwich composite beams... 10/10/2012 - 12/10/2012
    5  3-D finite element generation and stress analysis of human foot... 23/09/2010 - 25/09/2010
    6  Dikdörtgen Delikli Kompozit Plaklarda Burkulma Katsayılarının Bulunması... 04/09/1995 - 08/09/1995
    7  Eksenel Yüklü Ankastre Plaklarda Elasto-Plastik Gerilme Analizi... 06/09/1993 - 08/09/1993
    8  Kompozit T BaÄŸlantı Elemanlarında İç Gerilmelerin ve Elasto-Plastik Bölgelerinin Bulunması... 07/04/1993 - 09/04/1993
    9  Yarı Dairesel Çentikli Kompozit Levhaların Elasto-Plastik Zorlamalar Altında Mukavemetinin Artı... 16/09/1992 - 18/09/1992
    10  T BaÄŸlantılı elemanlarının DeÄŸiÅŸik Geometrilerinde Gerilme Yığılmalarının ve Burkulma YÃ... 16/09/1992 - 18/09/1992
    11  Increasing the limit of angular velocity by residual stresses on rotating discs with holes... 28/10/1991 - 30/10/1991
    12  Eksenel yüklenmiÅŸ Kompozit Düzlem Plaklarda Oryantasyon Açısına BaÄŸlı Olarak Gerilme Yığı... 24/04/1991 - 26/04/1991
  • NO AD YIL
    1  Mukavemet 1...  2014
    2  Mukavemet II...  1997
  • NO AD TARIH
    1  Karbon/Cam Lifi Hibrit Kompozit Malzemelerin Farklı Ortam KoÅŸulları Altında Düşük Hızlardaki Darbe Dirençlerinin GeliÅŸtirilmesi...  11/2007 - 10/2008
    2  DeÄŸiÅŸik hızlarda darbeye maruz tabakalı kompozit plakların mekanik özelliklerinin iyileÅŸtirilmesi...  5/2006 - 5/2008
    3  Kompozit Basınçlı Kaplar, Açık Silindirler ve Kapalı Silindirlerin Çevre Etkileri Altında Mekanik Özelliklerinin GeliÅŸtirilmesi...  11/2005 - 11/2007
  • NO Görev
    1 Mühendislik Fakültesi Makina Mühendisliği Bölümü Mekanik (Makina) Anabilim Dalı Başkanı, Ocak 2010- Ocak 2013
    2 Mühendislik Fakültesi Makina Mühendisliği Bölümü Mekanik (Makina) Anabilim Dalı Başkanı, Ocak 2007- Ocak 2010
    3 Mühendislik Fakültesi Makina Mühendisliği Bölümü Mekanik (Makina) Anabilim Dalı Başkanı, Ocak 2004- Ocak 2007
    4 Mühendislik Fakültesi Makina Mühendisliği Bölümü Mekanik (Makina) Anabilim Dalı Başkanı, Ocak 2001- Ocak 2004
    5 Mühendislik Fakültesi Makina Mühendisliği Bölümü Mekanik (Makina) Anabilim Dalı Başkanı, Ocak 1992- Ocak 1995